What Is an ICD-10 Code? A 2027 Guide for Medical Practices

Last Updated: November 13, 2026

Clinician in a white coat writing on a chart beside a laptop with secure document icons overlaid

Editorial Transparency

Created by: Billing Service Quotes Editorial Team

Technical Review: Tim Daniels, Director of Strategic Accounts, Billing Service Quotes.

Billing Service Quotes is a matching platform for providers searching for vetted medical billing companies. Finding a match is 100% for providers.

Quick Answers

An ICD-10 code is a standardized alphanumeric code that identifies a patient’s diagnosis, symptom or reason for a visit on a medical claim. For 2027 claims, ICD-10-CM diagnosis codes from the FY 2027 code set are required on every HIPAA-standard claim in the United States, and they tell the payer why a service was performed, which is what makes the procedure medically necessary and payable.

  • How the code is built: Each ICD-10-CM code runs 3 to 7 characters, starts with a letter and uses a decimal after the third character, with every added character making the diagnosis more specific.
  • Why it matters for payment: A wrong, outdated or mismatched diagnosis code triggers denials such as CO-11 and CO-167, and the FY 2027 code set stays in effect until the next update on October 1, 2027.
  • Where to get help: Billing companies in our network handle coding and claim scrubbing with rates starting as low as 2.95%, so a search for medical billing services near me can end in matched options within about 30 minutes.

New to the revenue cycle? Start here: the medical billing process, step by step.

What ICD-10 Codes Do on a Claim

One question we hear constantly from practice managers is why a claim with the right procedure code still denies. The answer is often the diagnosis. Every claim tells two stories: what the provider did, reported with a CPT or HCPCS code, and why the provider did it, reported with an ICD-10-CM code. Payers will not pay for the first without a diagnosis that justifies it.

On a professional claim, the CMS-1500 form holds up to 12 diagnosis codes in Item 21, labeled A through L. Each service line then uses a diagnosis pointer in Item 24E to link that procedure to the specific diagnosis that supports it. The electronic 837P transaction carries the same information. When the pointer links a procedure to a diagnosis that does not support it, the payer’s edits catch the mismatch and the claim stops.

ICD-10 codes also travel well beyond a single claim. Medicare Advantage plans use diagnosis codes for Hierarchical Condition Category risk adjustment, which affects plan payments. Quality programs, public health reporting and prior authorization reviews all read them. A diagnosis coded too vaguely can understate how sick a patient population is, while one coded inaccurately can create compliance risk.

That is why the diagnosis deserves as much attention as the procedure. In our experience matching providers with billing partners, practices that treat diagnosis coding as an afterthought tend to see the same denial reasons month after month without understanding where they start. If you want the wider picture of how coding fits next to billing work, read the difference between medical billing and coding.

ICD-10-CM vs. ICD-10-PCS vs. CPT

ICD-10 is not a single code set in the United States. The World Health Organization publishes the base ICD-10 classification, and the U.S. uses two modified versions, plus a separate procedure code set for physician services. Confusing them is a common source of rejected claims.

FeatureICD-10-CMICD-10-PCSCPT
What it reportsDiagnoses and reasons for visitsInpatient hospital proceduresProcedures and services
Who uses itAll providers, every settingHospitals, inpatient claims onlyPhysicians and outpatient settings
Maintained byCDC’s NCHSCMSAmerican Medical Association
Format3 to 7 characters, letter first7 alphanumeric characters5 characters, mostly numeric
ExampleE11.9 (type 2 diabetes)Not used in physician offices99214 (office visit)

For most physician practices, the working pair is ICD-10-CM plus CPT. The ICD-10-CM code explains the condition, and the CPT code describes the visit or procedure. An established patient office visit billed with CPT 99214, for example, needs a diagnosis that supports moderate medical decision making, or the level of service becomes hard to defend.

The U.S. moved from ICD-9 to ICD-10 on October 1, 2015, and every HIPAA-covered transaction has used ICD-10 since. The WHO has since released ICD-11, which took effect internationally in 2022, but the U.S. has not adopted it for billing, so ICD-10-CM remains the required diagnosis code set for 2027 claims.

How to Read an ICD-10 Code

ICD-10-CM codes follow a consistent structure, so once you know the pattern, any code becomes readable. The first three characters form the category, and each character after the decimal adds detail about cause, location, severity or the stage of care.

  1. Character 1 is a letter. It points to the chapter, such as E for endocrine conditions, I for circulatory conditions and S for injuries.
  2. Characters 2 and 3 complete the category. Together with the first letter, they name the general condition.
  3. Characters 4 through 6 add specificity. They describe details such as cause, body site, laterality and severity.
  4. Character 7 is an extension when required. Injury codes use it for the encounter, such as A for initial, D for subsequent and S for sequela.
  5. X is a placeholder. When a code needs a seventh character but has fewer than six, X fills the empty positions.

Take S93.401A as an example. S places it in the injury chapter, S93 covers dislocations and sprains at the ankle and foot level, S93.40 is a sprain of an unspecified ligament of the ankle, the 1 identifies the right ankle and the A marks the initial encounter. Billing that same visit as S93.40 without the laterality and seventh character would make the code invalid.

Some codes are much shorter because the category is already specific. I10 reports essential hypertension, E11.9 reports type 2 diabetes without complications and Z00.00 reports a general adult exam without abnormal findings. The Official Guidelines for Coding and Reporting, published each year by CMS and NCHS, require coding to the highest level of specificity the documentation supports.

How often do ICD-10 codes change?

ICD-10-CM codes change every year, with the new code set taking effect on October 1 at the start of the federal fiscal year. CMS can also release smaller updates on April 1. Claims for dates of service on or after the effective date must use the current codes, or they are rejected.

The changes are not trivial. As our coverage of the FY 2027 ICD-10-CM code changes explains, the update that took effect on October 1, 2026 added 238 new diagnosis codes and deleted 21, including the retirement of I42.0 in favor of more specific cardiomyopathy codes. Each deleted code that lingers in an EHR favorites list or a paper superbill becomes a guaranteed rejection.

The FY 2027 code set applies to dates of service through September 30, 2027, and the FY 2028 update takes effect on October 1, 2027. Plan a code review for September 2027, and repeat it every September after. Pull your most frequently billed diagnosis codes, compare them against the new release and update templates, superbills and charge entry shortcuts before October 1. Practices that skip this step usually discover the problem through a wave of rejections in the first two weeks of October, when claims that used to pass suddenly bounce back. Billing teams that track the annual cycle catch these changes before any claim leaves the office. CMS posts the final code files each summer, so there is time to prepare, but only if someone on the team owns the review and confirms the practice management system has loaded the new tables.

How ICD-10 Coding Errors Cause Denials

The biggest issue we see providers run into is not exotic coding mistakes. It is a small set of repeatable errors that show up on claim after claim. These six account for most diagnosis-related denials:

  1. Using unspecified codes when detail exists. Payers increasingly question unspecified diagnoses when the documentation supports a more specific code.
  2. Leaving off required characters. Missing laterality or a missing seventh character makes the code invalid, and the claim is rejected before review.
  3. Linking the wrong diagnosis to a procedure. A pointer to a diagnosis that does not support the service produces a CO-11 denial, the diagnosis is inconsistent with the procedure.
  4. Billing a diagnosis that coverage rules exclude. Medicare National and Local Coverage Determinations list covered diagnoses, and anything outside them returns CO-167.
  5. Submitting deleted or outdated codes. Codes retired in the October update are rejected for later dates of service.
  6. Sequencing the primary diagnosis incorrectly. The first-listed diagnosis should reflect the main reason for the encounter, or payers may deny or downcode.

Here is an illustrative example using round numbers, not reported data. A four-provider practice submits 1,500 claims a month at an average of $110. If 4 percent deny for diagnosis-related reasons, that is 60 claims and $6,600 stalled every month. Rework takes staff time, and claims that miss the timely filing window are lost entirely. Missing documentation adds a separate layer, covered in our CO-16 denial code guide, and payers are tightening edits across the board, as our report on rising claim denials in 2026 shows.

Diagnosis coding errors are among the most preventable denials. Get matched with billing companies in our network that code to full specificity, scrub every claim and keep up with each October update, free for providers.

Get a Free Quote

Should You Outsource ICD-10 Coding in 2027?

A practice with experienced coders and light payer complexity can manage ICD-10 in-house. Many small and mid-sized practices cannot keep up with yearly code changes, payer-specific coverage rules and denial follow-up while also running the front desk. Outsourcing coding and billing together often costs less than adding a certified coder to payroll, and it puts a team that codes every day behind each claim.

That is where Billing Service Quotes helps. We are a free matching platform, not a billing company. Practices submit a short request, and our team uses a human review to match them with billing companies in our network that fit their specialty, size and software. Providers are typically connected within 30 minutes. Our strategic accounts team, led by Director of Strategic Accounts Tim Daniels, works with practices across all 50 states and more than 60 specialties, and we have matched about 2,000 providers to date.

When you compare quotes, ask each company how it handles the annual October update, whether certified coders review diagnosis specificity before submission and how it reports denials by reason code. Rates start as low as 2.95%, depending on practice size and specialty. For a full checklist of what to ask, see our guide to choosing a medical billing company, and learn how matching works on our process page.

Frequently Asked Questions

What does ICD-10 stand for?

ICD-10 stands for the International Classification of Diseases, 10th Revision, published by the World Health Organization. The United States uses a clinical modification called ICD-10-CM for diagnosis coding on all claims, plus ICD-10-PCS for inpatient hospital procedures. Both have been required since October 1, 2015.

How many characters are in an ICD-10 code?

ICD-10-CM codes contain 3 to 7 characters. The first is always a letter, the second is a number and a decimal follows the third character. ICD-10-PCS codes for inpatient procedures always contain exactly 7 alphanumeric characters with no decimal.

What is the difference between ICD-10 and CPT codes?

ICD-10-CM codes describe why a patient was seen, meaning the diagnosis or symptom. CPT codes describe what the provider did, meaning the procedure or service. Every claim needs both, and the diagnosis must support the procedure for the payer to consider it medically necessary.

Who maintains ICD-10 codes in the United States?

The CDC’s National Center for Health Statistics maintains ICD-10-CM diagnosis codes, and CMS maintains ICD-10-PCS procedure codes. Together they publish the annual updates and the Official Guidelines for Coding and Reporting, with new codes taking effect each October 1.

What happens if I use an outdated ICD-10 code?

A claim with a deleted or invalid ICD-10 code is rejected for dates of service after the code was retired. The practice must correct the code and resubmit, which delays payment and risks missing timely filing limits. Review your common codes every September before the October 1 update.

Can a billing company handle ICD-10 coding for my practice?

Yes. Many billing companies in our network provide certified coding along with claim submission, denial management and payment posting. They code diagnoses to full specificity and update code sets each year. Billing Service Quotes matches practices with these companies free of charge, typically within 30 minutes.

Next Steps

Ready to stop losing revenue to coding denials? Get matched with billing companies in our network, free.

Get a Free Quote

Get Matched In 30 Minutes

Get a FREE Quote

Tell us about your practice and we'll connect you with trusted billing companies.

100% Free to providers — No hidden fees at any stage